Overview
The Retroflag GPi Case 2W is a handheld gaming device that pays homage to the classic Game Boy design. It is built around a Raspberry Pi Compute Module 4 (CM4), featuring a Broadcom BCM2710A1 processor with a 1.0 GHz quad-core Cortex-A53 CPU and VideoCore IV GPU. The device comes with 512 MB LPDDR2 RAM and relies on an external MicroSD card for storage. Its 3.0-inch IPS display offers a 640x480 resolution at 60 Hz, with a 4:3 aspect ratio and a pixel density of 266.67 PPI. The handheld is powered by a 2800 mAh battery and weighs 224 grams. Connectivity includes WiFi and Bluetooth 4.2, and it features a mono speaker and a 3.5 mm headphone jack. The GPi Case 2W runs open-source operating systems and is available in a classic DMG gray color.
Key Specs Highlights
- Processor: Broadcom BCM2710A1 (Cortex-A53, 1.0 GHz, 4 cores)
- GPU: Broadcom VideoCore IV at 250 MHz
- RAM: 512 MB LPDDR2 SDRAM
- Display: 3.0-inch IPS, 640x480, 4:3 aspect ratio
- Battery: 2800 mAh
- Connectivity: WiFi, Bluetooth 4.2
- Audio: Mono speaker, 3.5 mm headphone jack
- Storage: External MicroSD
- Weight: 224 grams
- Dimensions: 135 x 81 x 32 mm
Who It Is For
The GPi Case 2W is designed for retro gaming enthusiasts who enjoy tinkering with open-source systems. It excels at emulating classic consoles up to the SNES and PlayStation 1, with smooth performance for SNES FX and 3D PS1 games at 60 FPS. N64 and NDS games are playable but may not run at full speed. This device is not for those seeking modern gaming performance or a plug-and-play experience; it requires some setup and knowledge of Raspberry Pi ecosystems.
Buying Notes
The GPi Case 2W was released in December 2022 with a launch price of $80. The price range is typically between $75 and $100. Note that the device does not include a Raspberry Pi Compute Module 4; you must purchase that separately. The case is made of plastic and has a vertical orientation. There is no video output, vibration, or additional sensors. The device uses open-source software, so you can install various retro gaming distributions. Check compatibility with your chosen CM4 module before purchasing.
| CPU | Cortex-A53 |
|---|---|
| GPU | Broadcom VideoCore IV |
| RAM | 512 MB LPDDR2 SDRAM |
| Name | GPi Case 2W |
| Brand | Retroflag |
| Weight | 224 grams |
| Battery | 2800 mAh |
| Speaker | Mono |
| Storage | External MicroSD |
| Grip Type | Vertical |
| Processor | Broadcom BCM2710A1 |
| Body Color | DMG Gray |
| Dimensions | 135 mm x 81 mm x 32 mm |
| Screen PPI | 266.67 |
| Price Range | $075 - $100 |
| Screen Size | 3.0 inches |
| Screen Type | IPS |
| Audio Output | 3.5 mm headphone jack |
| Connectivity | WiFi, Bluetooth 4.2 |
| Launch Price | $80 |
| Release Date | 2022 / 12 |
| Screen Ratio | 4:3 |
| CPU Frequency | 1.0 GHz |
| Shell Material | Plastic |
| Operating System | Open Source |
| Screen Resolution | 640 x 480 |
| GPU Core Frequency | 250 MHz |
| Screen Refresh Rate | 60Hz |
| CPU Cores and Threads | 4 cores 4 threads |
| Emulator Game Support | SNES FX and 3D PS1 (60 FPS), N64 and NDS (playable, but not smooth) |
Full specs and updates on our site: https://www.oldman.dpdns.org/en/handheld/gpi-case-2w
Comments
Post a Comment